Fastener Standards

ASTM-A31
Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

ASTM-A36
Specification for Carbon Structural Steel A-153 Specification for Zinc Coating (Hot-Dip) on Iron and steel Hardware

ASTM-A193
Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

ASTM-A194
Specification for Carbon and Alloy Steel Nut for Bolts for High-Pressure and High-Temperature Service

ASTM-A307
Specification for Steel Bolts and Studs, 60,000 PSI Tensile Strength

ASTM-A320
Specification for Alloy Steel Bolting Materials for Low-Temperature Service

ASTM-A325
(Changed to ASTM F3125) - Specification for Structural Bolts, Steel, Heat Treated, 120/105 KSI Minimum Tensile Strength

ASTM-A354
Specification for Quenched and Tempered Alloy Steel Bolts, Studs and Other Externally Threaded Fasteners

ASTM-A370
Test Methods and Definitions for Mechanical Testing of Steel Products

ASTM-A394
Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

ASTM-A449
Specification for Quenched and Tempered Steel Bolts and Studs

ASTM-F467
Specification for Nonferrous Nuts for General Use

ASTM-F468
Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws and Studs for General Use

ASTM-A489
Specification for Carbon Steel Lifting Eyes

ASTM-A490
(Changed to ASTM F3125) - Specification for Heat-Treated Structural Bolts, 150 KSI Tensile Strength

ASTM-A502
Specification for Rivets, Steel Structural

ASTM-A563
Specification for Carbon and Alloy Steel Nuts

ASTM-A574
Specification for Alloy Steel Socket Cap Screws

ASTM-B633
Specification for Electrodeposited Coatings of Zinc on Iron and Steel

ASTM-B695
Specification for Coatings of Zinc Mechanically Deposited on Iron or Steel

ASTM-F432
Specification for Roof and Rock Bolts and Accessories

ASTM-F436
Specification for Hardened Steel Washers, Inch and Metric

ASTM-F467
Specification for Nonferrous Nuts for General Use

ASTM-F468
Specification for Nonferrous Bolts, Hex Cap Screws and Studs for General Use

ASTM-F541
Specification for Alloy Steel Eyebolts

ASTM-F547
Standard Terminology of Nails for Use with Wood and Wood-Base Materials

ASTM-F593
Specification for Stainless Steel Bolts, Hex Cap Screws and Studs

ASTM-F594
Specification for Stainless Steel Nuts

ASTM-F606
Test Methods for Determining Mechanical Properties of Externally and Internally Threaded Fasteners, Washers and Rivets

ASTM-F680
Standard Test Methods for Nails

ASTM-F788
Specification for Surface Discontinuities of Bolts, Screws and Studs, Inch and Metric

ASTM-F812
Specification for Surface Discontinuities of Nuts, Inch and Metric

ASTM-F835
Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

ASTM-F837
Specification for Stainless Steel Socket Head Cap Screws

ASTM-F844
Specification for Washers, Steel Plain (Flat), Unhardened for General Use

ASTM-F879
Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

ASTM-F880
Specification for Stainless Steel Socket Set Screws

ASTM-F901
Specification for Aluminum Transmission Tower Bolts and Nuts

ASTM-F912
Specification for Alloy Steel Socket Set Screws

ASTM-F959
Specification for Compression-Washer-Type Direct Tension Indicators (DTI) for Use with Structural Fasteners

ASTM-F1136
Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

ASTM-F1137
Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

ASTM-F1428
Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

ASTM-F1469
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

ASTM-F1470
Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

ASTM-F1503
Standard Practice for Machine/Process Capability Study Procedure

ASTM-F1554
Specification for Anchor Bolts, Steel, 36, 55 and 105 KDI Yield Strength

ASTM-F1575
Standard Test Method for Determining Bending Yield Moment of Nails

ASTM-F1667
Specification of Driven Fasteners: Nails, Spikes and Staples

ASTM-F1789
Standard Terminology for F16 Mechanical Fasteners

ASTM-F1852
(Changed to ASTM F3125) - Specification for "Twist-Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 KSI Minimum Tensile Strength

ASTM-F1940
Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

ASTM-F1941
Specification for Electrodeposited Coatings on Thread Fasteners, Inch and Metric

ASTM-F2281
Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws and Studs for Heat Resistant and High Temperature Applications

ASTM-F2282
Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods and Bars for Mechanical Fasteners

ASTM-F2328
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs and Nuts

ASTM-F2329
Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners

ASTM-F2437
Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators (DTI) for Use with Hex Cap Screws, Bolts, Anchors and Studs

ASTM-F2482
Specification for Load-Indicating Externally Threaded Fasteners

ASTM-F2660
Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement

ASTM-F2688
Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers

ASTM-F2329
Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners

ASTM-F2832
Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

ASTM-F2833
Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

ASTM-F2882
Specification for Screws, Alloy Steel, Heat Treated, 170 KSI and 1170 MPa Minimum Tensile Strength, Inch and Metric

ASTM-F3019
Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners

ASTM-F3042
Specification for Nonferrous Hex Socket, Slotted Headless and Square Head Set Screws

ASTM-F3043
Specification for "Twist-Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 KSI Minimum Tensile Strength

ASTM-F3111
Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 KSI Minimum Tensile Strength

ASTM-F3125
Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated 120 KSI (830 MPa) and 150 KSI (1040 MPa) Minimum Tensile Strength, Inch and Metric

ASTM-F3148
Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144 KSI Minimum Tensile Strength, Inch Dimensions

SAE-J58
Flanged 12-Point Screws

SAE-J78
Steel Self-Drilling Screws

SAE-J81
Thread Rolling Screws

SAE-J82
Mechanical and Quality Requirements for Machine Screws

SAE-J121
Decarburization in Hardened and Tempered Unified Threaded Fasteners

SAE-J122
Surface Discontinuities on Nuts

SAE-J123
Surface Discontinuities on Bolts, Screws and Studs in Fatigue Applications

SAE-J174
Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series

SAE-J238
Nut and Conical Spring Washer Assemblies

SAE-J429
Mechanical and Material Requirements for Externally Threaded Fasteners

SAE-J430
Mechanical and Chemical Requirements for Non-threaded Fasteners, Carbon Steel Solid Rivets

SAE-J482
Hexagon High Nuts

SAE-J483
Crown (Blind, Acorn) Nuts

SAE-J485
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins

SAE-J492
Rivets and Riveting

SAE-J493
Rod Ends and Clevis Pins

SAE-J773
Conical Spring Washers

SAE-J891
Spring Nuts

SAE-J892
Push-On Spring Nuts, Inch Series- General Specifications

SAE-J933
Mechanical and Quality Requirements for Tapping Screws

SAE-J995
Mechanical and Material Requirements for Steel Nuts

SAE-J1053
Steel Stamped Nuts on One Pitch Thread Design, Inch Series

SAE-J1061
Surface Discontinuities on General Application Bolts, Screws and Studs

SAE-J1102
Mechanical and Material Requirements for Wheel Bolts

SAE-J1199
Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners

SAE-J1200
Blind Rivets - Break Mandrel Type

SAE-J1237
Metric Thread Rolling Screws

SAE-J1648
Protective Coatings for Fasteners

SAE-J1701
Torque-Tension Tightening for Inch Series Fasteners

SAE-J2486
Tension Indicating Washer Tightening Method for Fasteners

ANSI-B1.1
Unified Inch Screw Threads (UN and UNR) Thread Form

ANSI-B1.12
Class 5 Interference-Fit Thread

ANSI-B1.15
Unified Inch Screw Threads (UNJ) Thread Form

ANSI-B18.1.1
Small Solid Rivet

ANSI-B18.1.2
Large Rivets

ANSI-B18.2.1
Square and Hex Bolts and Screws

ANSI-B18.2.2
Square and Hex Nuts

ANSI-B18.2.6
Fasteners for Use in Structural Applications

ANSI-B18.3
Socket Cap, Shoulder and Set Screws

ANSI-B18.5
Round Head Bolts

ANSI-B18.6.1
Wood Screws

ANSI-B18.6.2
Slotted Head Cap Screws, Square Head Set Screws and Slotted Headless Set Screws

ANSI-B18.6.3
Machine Screws and Machine Screw Nuts

ANSI-B18.6.4
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws

ANSI-B18.7
General Purpose Semi-Tubular Rivets, Split Rivets and Rivet Caps

ANSI-B18.8.1
Clevis Pins and Cotter Pins

ANSI-B18.8.2
Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins

ANSI-B18.9
Plow Bolts

ANSI-B18.10
Track Bolts and Nuts

ANSI-B18.11
Miniature Screws

ANSI-B18.13
Screw and Washer Assemblies (Sems)

ANSI-B18.15
Forged Eyebolts

ANSI-B18.17
Wing Nuts, Thumb Screws and Wing Screws

ANSI-B18.21.1
Lock Washers

ANSI-B18.22.1
Plain Washers

ANSI-B18.23.1
Beveled Washers